No power to a single fixture. Other fixtures on the same run are powered.

Issue

No power to a single fixture on a wire run where all other fixtures have power.

Troubleshooting, Causes and Remedies

• Check Spider Splice - pull questionable fixture lead wires to make sure they are securely in splice. Remove wire nuts to visually inspect splice. If splice looks compromised or suspect then re-do splice. See instructions.
• If splice looks OK, pull fixture lead wire from ground and visually inspect for cuts or nicks. If wire is suspect, cut out suspect portion and splice two ends togther in a waterproof casing.
• If splice and wire look OK, remove lamp and visually inspect socket for signs of corrosion or damage. Socket may need to be replaced.

(Document No. : Created on: 09/05/08 Last modified on: 09/05/08)

---